land measurement

How do you find the area of a field?
Take the figure you have worked out in square metres (m²), then divide by 10,000 to find the number of hectares (ha). For example, to calculate a larger area of land in hectares, use the following formula: Use a calculator to convert an area in square metres (m²) into hectares (ha).
How do you figure out the area?
The simplest (and most commonly used) area calculations are for squares and rectangles. To find the area of a rectangle multiply its height by its width. For a square you only need to find the length of one of the sides (as each side is the same length) and then multiply this by itself to find the area.
How do you calculate length?
To calculate the girth of a package, follow these guidelines:
  1. Measure the three parcel dimensions in centimetres. Example: 50 cm (Length) x 40 cm (Width) x 30 cm (Height).
  2. Add the measurements of the two smallest dimensions together. ...
  3. Now simply take the longest dimension and add this to the package girth

How do you calculate the area of a circle?
Square the radius and multiply by pi to find the area of the circle. C = pi * d calculates the circumference (distance around the outside of the circle). D in the formula refers to the diameter which is the width of the circle. The formula for thearea of a circle is A = pi * r * r where r is the radius (diameter / 2).
How to find the surface area of Rectangular Prisms:
  1. Find the area of two sides (Length*Height)*2 sides.
  2. Find the area of adjacent sides (Width*Height)*2 sides.
  3. Find the area of ends (Length*Width)*2 ends.
  4. Add the three areas together to find the surface area.
  5. Example: The surface area of a rectangular prism 5 cm long, 3 cm

Land Measurement Conversion Guide
1 Acre = 43,560 square feet
1 Acre = 160 square rods
1 Acre = 1.1834 square arpents
1 Acre = 10 square chains
1 Acre = 160 square rods
1 Acre = 160 perches
1 Acre = 160 poles
1 Acre = .4047 hectare
1 Acre = 4047 square meters
1 Acre = is about 208 3/4 feet square
1 Acre Square = 5645.376 square varas
Arpen measurements vary by locality:
1 Arpent (in LA, MS, AL, FL) = .84625 of an acre
1 Arpent Square (in LA, MS, AL, FL) = 191.994 feet or 2.909 chains on each side
1 Arpent (AR and MO) = .8507 of an acre
1 Arpent Square (AR and MO) = 192.5 feet or 2.91667 chains on each side
1 Caballeria (Texas-Spanish) = 108 acres
1 Centimeter = .3937 inches
1 Centimeter = .032808 feet
1 Chain = 66 feet
1 Chain = 4 rods
1 Chain = 4 perches
1 Chain = 4 poles
1 Chain = 100 links
1 Chain = 20.1168 meters
1 Foot = 12 inches
1 Foot = .36 varas
1 Furlong = 660 feet
1 Furlong = 40 rods
1 Foot = 0.3048006 meter
1 Hectare = 10,000 square meters
1 Hectare = 2.471 acres
1 Inch = .0254 meter
1 Kilometer = 3280.83 feet
1 Kilometer = .62 mile
1 Knot = 6080.2 feet
1 Labor (Texas-Spanish)= 1,000,000 square varas
1 Labor = 177.136 acres
1 League (Texas-Spanish) = 25,000,000 square varas
1 League = 4428.4 acres
1 Link = 7.92 inches
1 Link = .66 feet
1 Link = .2017 meter
1 Meter = 3.280833 feet
1 Meter = 39.37 inches
1 Meter Square = 10.764 square feet
1 Mile = 5,280 feet
1 Mile = 8 furlongs
1 Mile = 320 rods
1 Mile = 80 chains
1 Mile = 1.60935 kilometers
1 Mile = 320 perches
1 Mile = 320 poles
1 Mile = 8000 links
1 Mile = 1,609.2655 meters
1 Mile Square = a regular Section of land
1 Mile Square = 27,878,400 square feet
1 Mile Square = 640 acres
1 Mile Square = 259 hectares
1 Mile Square = 2.59 square hectares
1 Perch = 25 links
1 Perch = 1 pole
1 Perch = 1 rod
1 Perch = 16.5 feet
1 Pole = 16.5 feet
1 Pole = 1 perch
1 Pole = 1 Rod
1 Rod = 1 pole
1 Rod = 1 perch
1 Rod = 16.5 feet
1 Section = 1 mile long, by 1 mile wide
1 Section = 640 acres
1 Sitio (Texas-Spanish)= 1 league
1 Township = 6 miles long, by 6 miles wide
1 Township = 36 sections
1 Township = 36 square miles
Vara Measurements differ by locality:
1 Vara (Texas-Spanish) = 33 1/3 inches
1 Vara (Southern Colorado) 32.993 inches
1 Vara (Florida) 33.372 inches 
1 Yard = 36 inches
1 Yard = 3 feet
1 Yard Square = 9 square feet

Comments

Post a Comment

Popular posts from this blog

Hemoglobin

Image
Hemoglobin  Principle Blood is mixed with an   acid  solution so tha t  hemoglobin   is converted to brown-colored acid hematin. This is then diluted with water till the brown color matches that of the brown glass standard. The hemoglobin value is read directly from the scale. Equipment (1) Sahli’s hemoglobinometer: This consists of Sahli’s graduated hemoglobin tube (marked in grams and percent) and a comparator with a brown glass standard. (2) Sahli’s pipette or hemoglobin pipette (marked at 20 μl or 0.02 ml). (3) Small glass rod (stirrer). (4) Dropping pipette. Reagents (1) N/10 hydrochloric acid (2) Distilled water Specimen:  EDTA-anticoagulated venous blood or blood obtained by skin puncture. Method (1) Place N/10 hydrochloric acid into Sahli’s graduated hemoglobin tube up to the mark of 2 grams. (2) Take blood sample in Sahli’s pipette exactly up to 20 μl mark. Blood adhering to the exterior of the pipette is wiped away using absorbent paper or
Read more

lactometer

Image
What is Lactometer Lactometer, a cylindrical vessel made by blowing a glass tube. One side of glass tube looks like a bulb with filled by mercury and another site is thin tube with scaled. For milk testing lactometer dipped in milk which we are testing. In lactometer the point up to which it sinks in the pure milk is marked after that put in water and marked at the point up to which it sinks in water. It sinks less in milk then water because as we know milk is denser then water. At lactometer there are to portions i.e. ‘M ‘and ‘W’ which is divided in three parts and marked as 3, 2 and 1. That indicates the level of the purity in Milk. Here below some steps mentioned for milk testing – # Step 1-  Whenever you want to test the milk purity , you just put the instrument or lactometer in milk. # Step 2-  If it sinks up to the mark ‘M’ which mentioned at lactometer that means milk is pure or if not that means milk is impure. # Step 3-  If the milk is mixed in water then it woul
Read more

Blood Group Test

Image
Blood Group Test  Blood typing procedure: 1. Mix! First mix the patient's blood with three different reagents including either of the three different antibodies, A, B or Rh antibodies! 2. Look for agglutination! Then you take a look at what has happened. In which mixtures has clumping, or agglutination, occurred? The agglutination indicates that the blood has reacted with a certain antibody and is therefore not compatible with blood containing that kind of antibody. If the blood does not agglutinate, it indicates that the blood does not have the antigens binding the special antibody in the reagent. 3. Figure out the ABO blood group! Start by taking a look at the test tubes containing A and B antibodies. Has the blood agglutinated in either of these two tubes? No agglutination in test tube A, indicates that the patient's red blood cells do not have A antigens. Agglutination in the tube containing B antibodies indicates that the patients' red blood
Read more