Pulse rate

Pulse rate

What is the pulse?
The pulse is simply the expansion of the arteries. This expansion is caused by an increase in blood pressure pushing against the elastic walls of the arteries each time our heart beats.
These arterial expansions rise and fall in time with the heart as it pumps our blood and then rests as it refills. The pulsations are felt at certain points on the body where larger arteries run closer to the skin.
Find out more from MNT about heart rates with an article that explains what constitutes a normal heart rate reading. We also have an article that answers the question, 
How to find a pulse
[Two fingers feeling for radial pulse]

Arteries run closely under the skin at the wrist and neck, making the pulse particularly easy to find at these points.
Here are the simple steps needed to take a pulse at the wrist (radial pulse):
  • Turn one hand over, so it is palm-side up
  • Use the other hand to place two fingertips gently in the groove on the forearm, down from the fold of the wrist and about an inch along from the base of the thumb
  • When the position is right, you should feel the pulsation of your heart beat


The pulse can also be found on the neck using two fingers in a similar way; gently press into the soft groove on either side of the windpipe (trachea).
This is the pulse running through one of the carotid arteries - the main arteries that run up the neck from the heart to the head.
Less easy places to find a pulse are:
  • Behind the knees
  • On the inside of an elbow when the arm is outstretched
  • In the groin
  • At the temple on the side of the head
  • On the top or the inner side of the foot

How to record a pulse reading

Once the pulse has been found by following the steps above, hold still and:
  • Use a timepiece or watch with a second hand, or look at a clock with a second hand
  • Over the course of a minute or 30 seconds, count the number of beats felt
  • The number of pulses over a minute is the standard heart rate measurement, which can also be calculated by doubling the number of pulses felt over 30 seconds

Comments

Post a Comment

Popular posts from this blog

Hemoglobin

Image
Hemoglobin  Principle Blood is mixed with an   acid  solution so tha t  hemoglobin   is converted to brown-colored acid hematin. This is then diluted with water till the brown color matches that of the brown glass standard. The hemoglobin value is read directly from the scale. Equipment (1) Sahli’s hemoglobinometer: This consists of Sahli’s graduated hemoglobin tube (marked in grams and percent) and a comparator with a brown glass standard. (2) Sahli’s pipette or hemoglobin pipette (marked at 20 μl or 0.02 ml). (3) Small glass rod (stirrer). (4) Dropping pipette. Reagents (1) N/10 hydrochloric acid (2) Distilled water Specimen:  EDTA-anticoagulated venous blood or blood obtained by skin puncture. Method (1) Place N/10 hydrochloric acid into Sahli’s graduated hemoglobin tube up to the mark of 2 grams. (2) Take blood sample in Sahli’s pipette exactly up to 20 μl mark. Blood adhering to the exterior of the pipette is wiped away using absorbent paper or
Read more

lactometer

Image
What is Lactometer Lactometer, a cylindrical vessel made by blowing a glass tube. One side of glass tube looks like a bulb with filled by mercury and another site is thin tube with scaled. For milk testing lactometer dipped in milk which we are testing. In lactometer the point up to which it sinks in the pure milk is marked after that put in water and marked at the point up to which it sinks in water. It sinks less in milk then water because as we know milk is denser then water. At lactometer there are to portions i.e. ‘M ‘and ‘W’ which is divided in three parts and marked as 3, 2 and 1. That indicates the level of the purity in Milk. Here below some steps mentioned for milk testing – # Step 1-  Whenever you want to test the milk purity , you just put the instrument or lactometer in milk. # Step 2-  If it sinks up to the mark ‘M’ which mentioned at lactometer that means milk is pure or if not that means milk is impure. # Step 3-  If the milk is mixed in water then it woul
Read more

Blood Group Test

Image
Blood Group Test  Blood typing procedure: 1. Mix! First mix the patient's blood with three different reagents including either of the three different antibodies, A, B or Rh antibodies! 2. Look for agglutination! Then you take a look at what has happened. In which mixtures has clumping, or agglutination, occurred? The agglutination indicates that the blood has reacted with a certain antibody and is therefore not compatible with blood containing that kind of antibody. If the blood does not agglutinate, it indicates that the blood does not have the antigens binding the special antibody in the reagent. 3. Figure out the ABO blood group! Start by taking a look at the test tubes containing A and B antibodies. Has the blood agglutinated in either of these two tubes? No agglutination in test tube A, indicates that the patient's red blood cells do not have A antigens. Agglutination in the tube containing B antibodies indicates that the patients' red blood
Read more